Bang & Olufsen BeoRemote One - User Guide - Manual (Page 17)

17
>> Using BeoRemote One for a ‘Beo4’ product
When you use BeoRemote One for a ‘Beo4’
product, the Product Option menu is
adapted to match the Option settings
available with your Beo4 remote control.
To Option programme a ‘Beo4’ product
using BeoRemote One …
Point your remote control at the IR-receiver
of the product you want to Option
programme. The distance between the
remote control and the IR-receiver must be
maximum 0.5 metres.
Press to bring up the current
product, such as
BeoVision, in
the BeoRemote One LIST
Select the product* 1 that you
want to Option programme,
such as
Beo4 LINK
Press to bring up Settings
Press to bring up Advanced
Press to bring up Product
Option
Select the appropriate Option:
V.OPT., A.OPT. or L.OPT.
Enter the appropriate number
(
0, 1, 2, 4, 5 or 6)
Step 2 – Set up your ‘Beo4’ product to the correct Option
LIST
...
...
LIST
Settings
Advanced
Product
Option
...
0 – 6
A.OPT.
V.OPT.
L.OPT.
Select one of the three ‘Beo4’ Options,
V.OPT., A.OPT. or L.OPT.. For information
about which Option to use, see the guide for
your television or music system.