Black & Decker Linea Pro BB6600 - Manual (Page 11)

• When continuous operation is required, first depress the switch and then the lock-on button (5) and release to disengage
lock, squeeze and release switch.
WARNING: Continuous running of machine should not exceed 30 minutes.
REPLACING CARBON BRUSHES (FIG. D)
• Use a screwdriver to remove the brush holder cap.
• Take out the worn carbon brush, insert the new one and secure the brush hold cap.
WARNING: Remove and check the carbon brushes regularly. Replace when they wear down to the limit mark.
MAINTENANCE
Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and regular cleaning.
WARNING: Before performing any maintenance, switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of
recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local
regulations may provide for separate collection of electrical products from the household, at municipal waste sites
or by the retailer when you purchase a new product.
SERVICE INFORMATION
Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether
you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.
SPECIFICATIONS
Power 600W
No-Load speed 0-16000 rpm
Air Volumen 3,5 m3/min
Weight 1,7kg
11
ENGLISH