Bang & Olufsen EarSet 2 - User Guide - Manual (Page 10)

Volume and the microphone
During calls, you can adjust the
volume by pushing the switch up
or down. There are eight possible
settings. When you reach the
upper or lower limit for sound
volume, a beep sounds from the
headset.
The selected volume level is used
for all subsequent calls, but the
maximum volume setting that can
be stored is 6.
To switch the microphone off
during a call, press and hold the
switch until you hear a beep from
the headset. A repeating beep is
heard until the microphone is
switched back on.
To switch the microphone back on,
press or push the switch.
Adjust the headset ringer level
During standby, you can adjust the
headset ringer level by pushing the
switch up or down. There are eight
possible settings. After each
adjustment, the ringer melody is
played once.
The selected ringer level is used for
all subsequent calls.
>> English 10