Bang & Olufsen BeoCom 1401 - User Guide - Manual (Page 2)

ACCESSORY
THE TABLE BASE
The table base has 4 rubber feet. Each
foot can be tipped up to allow the
cord to be led out in the direction of
your choice.
The cover plate can be tilted to rest
on the tabletop. Under the cover
plate, the writing pad and directory
for your code numbers are placed.
PLACEMENT AND CLEANING
Do not place the telephone in very
dusty or dirty surroundings. Do not
expose it to excessive moisture.
Clean the telephone with a firmly
wrung, soft cloth dipped in water
containing a few drops of mild
detergent.
TECHNICAL SPECIFICATIONS
Network analogue (PSTN)
Power supply from the telephone
network
Ambient temperatures -25 o C – +55 o C
Relative humidity 15% - 95%
Supplier code N909
BeoCom 1401 is intended for use on public,
analogue telephone networks.
Optimum telephone performance can only be
expected in the country where your telephone
was bought, as legal requirements for approval
may vary from country to country.
If you have questions relating to the use of your
BeoCom 1401, please contact your local retailer
for further information.
Hereby Bang & Olufsen declares that BeoCom
1401 is in compliance with the essential
requirements and other relevant provisions of
Directive 1999/5/EC.
Further information is available on the Internet
at:
www.bang-olufsen.com
BeoCom 1401
3507153 0301 Version 1.0