Bang & Olufsen BeoTalk 1200 - User Guide - Manual (Page 37)

36
Symptom
The answering machine function cannot be
activated
A new number is shown in the display but the
phone does not ring
Silent Answer cannot be activated
Some subscribers cannot call you
The display is illuminated though all
messages have been played
is shown in the display and the
display is illuminated
BeoTalk 1200 answers the call sooner than the
pre-programmed ringing time
The phone rings more than one time when
using Rejection of incoming calls
The phone rings even though Silent Answer
has been connected
The index numbers are not shown in the dis-
play as described in this guide
Possible cause
No announcement has been recorded for the
type of announcement chosen
• Rejection of incoming calls has been acti-
vated
• Silent Answer has been activated
The answering machine function has not been
activated
The numbers exist in the Rejection list, and the
function has been activated
There are further new messages (Caller ID calls
or messages)
• BeoTalk 1200 has not been connected to the
telephone plug
• A telephone is off-hook
New messages received and at the same time
the Rate saver has been activated
• Technical limitations
• Rejection has not been activated
You do not subscribe to the caller ID
service
The phone numbers have more than 10 digits
Possible correction
Record an announcement and activate the type
of announcement
Activate the answering function
Scroll through the News list
• Connect BeoTalk 1200 to the
telephone plug
• Replace the handset
Worth knowing – about troubleshooting