Bang & Olufsen BeoCom 6000 - User Guide - Manual (Page 42)

>> Preference settings
Language … Select the language of the display texts.
Switchboard*… Set BeoCom 6000 for use with a switchboard. Options
are Yes and No. If you choose Yes, use the number keys to enter a prefix
code and turn the wheel to select a pause length. You can select a pause
length between 0 and 12 seconds, or select Wait. Note that you must
enter prefix codes manually when entering phone numbers in the Phone­
book.
Flash time … Choose Long, Short or Customized. The correct flash time
depends on how you have connected your phone.
42
*This option is only available if you
use the handset with a
BeoCom 6000 base, a BeoLine
PSTN base, or a BeoLine ISDN base.