Bang & Olufsen BeoCom 2 - Getting Started - Manual (Page 11)

> Press to switch on the handset. Register
handset to base? is shown in the display.
> Press OK. The handset searches for an open
base.
> When a base is located, the PARK number* for
the base is shown. Check the number against
the number on the base.
> If the numbers do not match, push the Track
point down to view the available bases. If your
base is not shown, open the base for
registration once more and repeat the
procedure.
> If the numbers match, press OK to register the
handset to the base.
> If the base prompts you for a pincode, enter the
pincode and press OK. The display tells you
when registration is complete. You can now
name the handset, as described on page 12.
*Depending on which base you have, the label
with the PARK number on it can be found behind
the socket cover, on the socket cover, or on the
bottom of the base.
Register
handset
to base?
OK
OK
...
Searching base
Wait...
...
Registering
Wait...
Enter handset
name?
Base 1/2: 36-
000223344556
Base 2/2: 36-
000223344557
11