Baumfolder Flexifold: 2st Station (in 2004) - Manual (Page 28)

TP10495 PAGE 28
TOTAL COUNT #######
RESET
TOTAL COUNT #######
10.0 COUNTER OPERATION
During normal operation, the display should show
the total count (maximum count 9,999,999), This display is
known as the count screen.
10.1 Resetting the total count
To reset the total count press the “RESET” button,
then press the “COUNT” button.
10.2 Rate
The “RATE” button is used to display the average
pieces per hour, both current and average since the last total
counter reset.
Pressing the “RATE” button will change the display
to the rate screen consisting of two lines. The top line is the
current rate. It will have a 5 digit display, and will refresh
every 6 seconds. The second line will show the average
pieces per hour since the last total counter reset. This line
will also have a 5 digit display, and refresh every 30 sec-
onds.
The display will stay in this mode until another mode
button is pressed. The “ENTER” and “RESET” buttons
will have no affect in this mode.
NOTE: Every time the total count is reset the
average rate per hour will also be reset.
NOTE: If a button is not pressed within 2 minutes the
machine will return to the operating mode.
CURRENT RATE #####
AVERAGE RATE #####