BBS Lighting Area 48 LED - Manual (Page 2)

USER MANUAL
SW2
AREA 48 SOFT
WWW.BROTHERS-SONS.DK
SOFTWARE MENU
Default values indicated by bold font
....continues on next page
Software vers. 1_3_07
Addr 1 DMX adress value 1 - 512
M
ode Resolution 8 bit resolution
16 bit resolution
Response Slow (fade between values)
Fast (snap between values)
Strobe OFF
On - (adds 2 strobe channels)
Curve Square dimmer curve
Linear dimmer curve
noDMX Action when loss of DMX signal:
HOLD - last received DMX value
OFF - Sets output to zero
MAN - Go to Manual DMX value
Display OFF 2n - Display off after 2 minutes
ON - Display always on
Tools Ver Shows software version - READOUT ONLY
HW Ver Shows hardware version - READOUT ONLY
L Temp LED temperature - READOUT ONLY
P Temp PCB temperature - READOUT ONLY
DMX In 3 first digits shows DMX adress - READOUT ONLY
3 last digits shows DMX value - READOUT ONLY
Reset
Confirm (Reset unit by pressing enter)
test display Display test - all seven segments of each digit on - READOUT ONLY
At start up the display readout shows e.g.:
Hardware ID: 4572, Product name: Area48, Software version: 1_3_05
When done showing this information, the display shows the set dmx adress.
New:
If no DMX signal is present the unit will at startup enter manual mode, starting at the latest set
manual intensity. This allows for standalone operation.