Brother, Brother & Sons Aledin Software - Manual (Page 3)

3.
If a COM Port does not show
up in the “Select COM Port” ,
click the refresh button
and select the COM Port.
5.
The upload to the Uploader
will start.
The following will be displayed:
Status, “Lines Remaining” countdown
and a Progress bar.
The 4 chasing LEDs on the Uploader
will turn off during software upload. 6.
When done uploading, click
OK, when the “File download
completed” dialogue is shown.
The 4 LEDs on the Uploader
will flash once and then resume
the chase.
4.
New software files are Hex files
and located in the “HEX file” folder.
Select the appropriate Hex file
and click “Upload Firmware”
Page 3