Black Box HS201A - Manual (Page 13)

12
2-IN-1 HEADSET
Figure 3-3. Changing Ears.
3. Rotate 180° clockwise if you
are going from right ear to
left ear, counterclockwise if
you are going from left ear
to right ear.
3.3 Removal
1. Remove the ear cushion.
2. In the right-ear wearing style
with the speaker facing you,
hold the headset in your left
hand between your thumb
and index finger.
3. With your right thumb and
index finger, firmly grasp
the top of the ear capsule at
the saddle (see Figure 3-4).
Figure 3-4. Removing Ear Capsule.
4. Pull down and out with your
right hand, releasing the C-
ring from the receiver
housing.
3.4 Installation
1. Remove the headband.
2. With the speaker side of the
receiver facing you hold the
headset in your left hand
between your thumb and
index finger.
3. With your right hand, hold
the ear capsule so that the
C-ring opening is facing the
receiver.
4. Push the C-ring onto the
receiver housing until it
springs into place in the
groove (see Figure 3-5).
Figure 3-5. Installing Ear Capsule.