Bendix Commercial Vehicle Systems MV-1 MODUTROL - Manual

1
®
SD-03-341
1
Bendix ® MV-1 ™ Modutrol
DESCRIPTION
The Bendix ® MV-1 ™ modutrol assembly is an integrated air
control module designed for dash mounting in a truck/tractor.
The bodies for the modutrol assembly, as well as for the
“spool” inserts, are molded of a nonmetallic, noncorrosive
material. The assembly consists of three push-pull type
valves and two optional lever type valves. All valves utilize a
spool “insert,” which can be replaced from the front of the
assembly without removal of the assembly or connecting
air lines.
The three push-pull type valves provide the following functions:
1. Tractor protection control.
2. Trailer service air supply.
3. System park.
4. Trailer park only.
5. Trailer recharge with tractor spring brakes applied.
Reference Figs. 1 & 5, valves V-1 and V-2 utilize identical
spool “inserts.” The functions of valves V-1 and V-2 are
essentially the same as the Bendix
® PP-1 ™ control valve.
Valve V-3 utilizes a spool “insert” consisting of two valves; a
nonautomatic push-pull function similar to that of the Bendix
®
PP-8 ™ valve, and a pilot operated three-way valve similar to
that of the Bendix ® SV-1 ™ valve.
VALVE B
VALVE A
VALVE C
5-3/8”
VALVE D
VALVE E
FIGURE 1 - MV-1 ™ MODUTROL