Boca Research SDIO Wireless LAN Card SDW11b - Manual (Page 6)

To verify if the installation of the driver was completed
successfully:
1. Soft reset the PDA (push Soft-reset Button of PDA)
* Some PDA may not require resetting but it should be safer to reset.
2. Insert the SDW11b into the PDA
3. Check the LED on the SDW11b. If steady Blue light is seen, the SDW11b is active.
4. (Optional) To check the quality of the network connection, you should use the SDW11b configuration
utility program as described in the next section
SDW11B CONFIGURATION UTILITY
1. Click Install Utility to perform utility installation.
Step 2
2. Click “YES” to proceed the installation.
6