Bendix Commercial Vehicle Systems AH-1B AIR HYD INTENSIFIER 4/04 - Manual (Page 5)

5
FIGURE 5 - EXPLODED VIEW
FIGURE 6
8. Never attempt to disassemble a component until
you have read and understand all recommended
procedures. Some components contain powerful
springs and injury can result if not properly
disassembled. Use only proper tools and observe
all precautions pertaining to use of those tools.
9. Use only genuine Bendix ® replacement parts,
components and kits.
A. Use only components, devices and mounting
and attaching hardware specifically designed
for use in hydraulic brake systems.
B. All replacement hardware, tubing, hose,
fittings, etc. must be of equivalent size, type
and strength as the original equipment.
10. Components with stripped threads or damaged
parts should be replaced rather than repaired. Do
not attempt repairs requiring machining or welding
unless specifically stated and approved by the
vehicle and component manufacturer.
11. Prior to returning the vehicle to service, make
certain all components and systems are restored to
their proper operating condition.
NON-PRESS
PLATE RETURN
SPRING SPRING
SEAT
BOOT
BUSHING
ASSEMBLY
DIAPHRAGM
PRESSURE
PLATE
NUT (2)
CLAMP RING
RESERVOIR CAP
ASSEMBLY
MASTER
CYLINDER BODY
LOCKWASHER
(2)
PHILLIPS
SCREW (2)
SEAL
1-1/4” RES.
RETAINING
NUT
RESERVOIR
COMPENSATING
(TILT) VALVE
ASSEMBLY
RESERVOIR
MTG. PAD
SPRING
PISTON ASSY.
(W/ SEAL)
O-RING
MOUNTING
BRACKET
GASKET
WASHER (2)
ACTUATOR
NUT (2)
O-RING