Bowens QUADX BWL-0335/2 - Manual (Page 2)

www.bowens.co.uk www.bowens.co.uk
Specifications
19 2
Due to our policy of constant product improvement, Bowens International reserves the right to change equipment
specifications at any time and without notice.
Model Number
Stored Energy (Max)
Supply Voltage AC
Stabilisation
Modelling Lamps
Photocell
Sounder
Flash Power Control
Guide Number
Full Power, 50º Keylite ISO 100
Flash Duration
Flash Colour Temperature
Recommended Flash Head
Length
Width
Typical Recycle Time
(Full Power 230V 50Hz)
Overload Protection
Modelling Power Control
Ready Indication
IR Remote Control
Nominal Sync. Voltage
BW-7600
3000Ws Channel A only. Or, Split 2000Ws (CHA) + 1000Ws (CHB)
100-250V AC 50 or 60Hz
±0.1 f-stop
4 x Max 650W
On / Off
On / Off
6.6 f-stop in 1/10 increments, scaled 10 = 3000Ws
175 (UV Coated Tube)
1/1430s (Full Power) t=0.5, Approximate value indicated.
Approx. 6500K (UV Coated)
QUADX Head (BW-7660)
360mm (14 1 ⁄ 2 ”)
180mm (7”)
2 Seconds - 240V AC 50Hz
2.6 Seconds 120V AC 60Hz
15A Thermal Breakers for Charge and Modelling
Off / Proportional / Independent / 100% / Automatic 100%
plus bias control
Green ‘READY’ LED at 100%, Audible ‘READY’ Beep
or Modelling light indication as selected.
Full control, 12 Channels
Number depends on transmitter
6V
Description Page
Introduction and Safety Notes 3
Control Panel Guide 4
Function Overview 5 - 6
Getting Started 7
Menu System Overview 8
Information Menu 9
Main Selection Menu 10 - 11
Advanced Options Menu 12 - 15
QUADX Flash Head 16
RingLite 16
Accessories 17
Pulsar Radio Trigger 17
Warnings 18
Specifications 19
Table of Contents
QUA DX
Height
Weight
370mm (14 1 ⁄ 2 ”)
11.6Kg (25.5lbs)