Bendix Commercial Vehicle Systems BA-922 COMP User Manual
Page 11
Bendix
®
BA-922
®
Compressor Installation and Application Review
Page 11 of 14
BW2514 ©2006 Bendix Commercial Vehicle Systems LLC • All Rights Reserved • 3/22/06 • rev: 1.
Compressor Oil Supply
Source: _________________________________________
Line size to: ____________________________________
Distance
to:
____________________________________
Compressor Oil Return
Return through front flange
Return through bottom drain only
Return through both bottom drain and front flange
Measured Oil Supply Pressure (record at compressor fitting at engine idle):
_______________________________________________________
Recommended Test Procedure:
Install a pressure gauge at the oil fitting on the air compressor. Record the oil pressure at
engine idle with the engine at normal operating temperature.
Was measured oil supply pressure greater than 14.0 psi ? YES
NO
Describe any auxiliary fittings at the oil supply of the compressor: