Bendix Commercial Vehicle Systems WINGMAN ACB - Manual (Page 13)

13
The Bendix ® Wingman ® ACB System Components
The Bendix ® Wingman ® ACB radar locates and tracks moving vehicles.
The radar is located at the front of your vehicle – either on the bumper or
just behind it on a cross-member. When located behind the bumper, in
some cases the unit also may be behind a protective covering that allows
the radar signal to pass through.
The Bendix Wingman ACB radar is pre-aligned at the factory and no
adjustment should be needed. If the radar becomes misaligned, (or any
other system problem is detected) a message — or light on the dash —
lets the driver know that service is needed.
Above: Examples of radar locations.
System Display
Driver information about the Wingman
ACB system is either fully integrated
into the vehicle dashboard, or uses
the Bendix
® Driver Interface Unit (DIU).
Although the system functions the
same, how the alerts are displayed
to the driver can be different. See
the Alerts and Warnings section of
this manual on pages 20-22 for more
detailed information about the alerts.
NOTE: For some integrated systems, the volume level of the alerts is not
adjustable, nor can they be switched off.