Bendix Commercial Vehicle Systems SMARTIRE TPMS LF TOOL USERS MANUAL - Manual (Page 3)

1. INTRODUCTION
The SmarTire
™
TPMS by Bendix CVS LF tool is a handheld device designed to provoke data
transmissions from SmarTire
™
sensors. The tool can be used to assist the installer during:
• New Installations – programming sensor ID numbers & vehicle configuration into the
receiver
• Sensor Replacement - programming new sensor ID numbers into the receiver
• Installation Verification (without moving vehicle)
NOTE: The SmarTire
™
LF tool is compatible ONLY with SmarTire
™
low- and high-pressure
commercial sensors.
2. OVERVIEW
Transmission End
Battery Cover
Low Battery LED
Initiate LED
Learn LED
Initiate/Learn Button
On/Off & Mode
Select Button
3