Bendix Commercial Vehicle Systems TIM G2 USER GUIDE - Manual (Page 4)

BW2867 © 2011 Bendix Commercial Vehicle Systems LLC, a member of the Knorr‑Bremse Group. 10/11. All Rights Reserved.
EXAMPLES
d) Installation test
Confirm that the
Trailer‘s parking
brake is NOT active
then press ENTER.
Start Inst. Test
Install. Check:
Reserv. Press:
S-C Sensor:
Confirm that wheel
speed sensors have
been set, then
press ENTER.
= Confirm
Confirm that the
Truck‘s parking
brake is applied
then press ENTER.
= Confirm
= Confirm
(if reservoir pressure > 6Bar)
2x
2x
Install. Check:
Reserv. Press:
S-C Sensor:
S-D Sensor:
Reserv. Press:
S-C Sensor:
S-D Sensor:
Demand Press:
S-C Sensor:
S-D Sensor:
Demand Press:
Tilt Angle:
< 5 o
Installation test
has been success-
fully executed.
Please switch igni-
fully executed.
Please switch igni-
tion OFF-ON to
memorize status.
Start Inst. Test
Install. Check:
Reserv. Press:
S-C Sensor:
2x
END
Accelerate selected
wheel to 3mph
Fully apply the brake
pedal, then release it
TEBS mounting angle
within tolorance
Confirm that
cables are securely
clipped, then
press ENTER.
= Confirm
Overview of wheel
location, “Confirm”
Overview of wheel
location, “Confirm”
Accelerate selected
wheel to 3mph
Start Inst. Test
Install. Check:
Reserv. Press:
S-C Sensor:
<Active DTCs>
ODO: 127mi
Load Rear: 58420lb
Inst. Test Missing
Initial Menu
Scroll to “Inst. Test Missing”
+
SECURE Trailer
against movement!
During this test
all its brakes may
all its brakes may
be released auto-
matically! Press
ENTER to confirm
matically! Press
ENTER to confirm
you have secured
the Trailer.
= Confirm
Confirm that all
non connected
ports are plugged
then press ENTER.
= Confirm
Confirm that pneu-
matic connections
are secure, then
press ENTER.
= Confirm
2x
3x
Scroll and follow
instructions on the
screen
Installation test
is missing! To
start it browse to:
Main Menu->
b) Display current Diagnostic
Trouble Code (DTC) status
c) Changing the language
default
a) Setting next service distance to
6,250 miles (mi)
Reset Trip
Srv Date 18-01-10
Srv Mi: 6240mi
Set Next Service
Active DTCs:
S-C O/C.
S-D O/C.
Module Error
Main Menu
Stored DTCs
Distance & Serv.
Operating Info
System Info
+
1x
Date Based
Distance Based
Exit
Srv Mi: 0mi
Save & Exit
Exit
+
5x
+
1x
Srv Mi: 6250mi
Save & Exit
Exit
NOTE: “
*
” inactive, buttons and
revert to normal function
+
1x
Next service
distance has been
succesfully set in
ECU.
Indicates cursor buttons and
are now used to change ‘mi’ values
“ * ”
Srv Mi: * 0mi
Save & Exit
Exit
2x = 6250 mi
+
END
Main Menu
Stored DTCs:
Distance & Serv.
Operating Info
System Info
Overview of DTC
S-C Open circuit or
Shorted to Battery
DTC:
000D00
+
1x
DTC Detail
Scroll
Occurrence count:
4
First detection:
0mi
Scroll
Main Menu
System Info
ECU Info
TIM Info
Exit
+
Scroll to “TIM Info”
Lang.: US English
Scr Saver: Load
Set LCD Contrast
Manufacturing Info
US English
N.Am. French
N.Am. Spanish
Exit
+
1x
Langue: N.Am. French
Eco ecran Charger
Régl Contraste LCD
Info Fabricant
Info Fabricant
Test Affichage
Test Touche
Sortie
Scroll to “Sortie” (Exit)
END
2008-03-15 19:43.44
Last detection:
0mi
2008-03-31 10:11.47
END