Bendix Commercial Vehicle Systems BRAKE APPLICATION GUIDELINES - Manual (Page 34)

33
Nomenclature
Model Coverage
S-cam Brake
Size Confi guration
Model in. mm Shoe Spider Anchor* Application
ES-150-4L 15.0 x 4 381 x 102 Fabricated Fabricated SAP Steer Axles
ES-150-4D 15.0 x 4 381 x 102 Fabricated Cast SAP Steer Axles
ES-150-6D 15.0 x 6 381 x 152 Fabricated Cast SAP Steer or Drive Axles
ES-150-8D 15.0 x 8.63 381 x 219 Fabricated Cast SAP Drive Axles
ES-165-5D 16.5 x 5 419 x 127 Fabricated Cast SAP Steer or Drive Axles
ES-165-5L 16.5 x 5 419 x 127 Fabricated Fabricated SAP Steer or Drive Axles
ES-165-6D 16.5 x 6 419 x 152 Fabricated Cast SAP Steer or Drive Axles
ES-165-6L 16.5 x 6 419 x 152 Fabricated Fabricated SAP Steer or Drive Axles
ES-165-6H 16.5 x 6 419 x 152 Cast Cast DAP Steer Axle Transit Bus
ES-165-7D 16.5 x 7 419 x 178 Fabricated Cast SAP Steer or Drive Axles
ES-165-7H 16.5 x 7 419 x 178 Cast Heavy Cast DAP On/Off Hwy. Drive Axles
ES-165-7L 16.5 x 7 419 x 178 Fabricated Fabricated SAP Steer or Drive Axles
ES-165-7M 16.5 x 7 419 x 178 Fabricated Heavy Cast DAP On/Off Hwy. Drive Axles
ES-165-8L 16.5 x 8.63 419 x 219 Fabricated Fabricated SAP Drive Axles
ES-165-8D 16.5 x 8.63 419 x 219 Fabricated Cast SAP Drive Axles
ES-165-10H 16.5 x 10 419 x 254 Cast Cast DAP Drive Axle Transit Bus
EB-180-7R 18.0 x 7 457 x 178 Cast Heavy Cast SAP On/Off Hwy. Drive Axles
ADB (Air Disc Brake)
Model Rotor Diameter Caliper Application
in. mm
ADB22X 16.94 430 Dual Piston 2-Guide Pin Steer/Drive/Trailer Axles
Floating Design
* SAP = single anchor pin
DAP = double anchor pin
Nomenclature