Dual alarm clock radio for ipod bcr002ip 4 – BUSH Dual Alarm Clock Radio For iPod BCR002IP User Manual

Page 4

Advertising
background image

BATTERY INSTALLTION FOR PLAY AND TIME MEMORY

1. Remove the battery cover before operation

2. Put 6x1.5V(aa-size) battery into the compartment

Noted: ensure that (+) and (-) symbol are respected

3. Put the battery compartment cover back in position

FUNCTION

1. To switch on the unit, press and release the function button
2. To turn off the unit, press & hold the function button for 2 seconds, then release it
3. Without iPod on the dock, the default play mode order is: aux-radio
4. With the iPod on the dock, the default play mode order is: aux-radio-iPod

iPod OPERATION

1. Put the iPod into the dock

2. Press the function button to reach iPod mode

3. Press the “Vol-” and “Vol+” buttons to decrease/increase the volume sound

4. Press the down or up button to select the desired song

RADIO OPERATION

1. Press function button to select the radio mode

2. To press the down or up button for 2 seconds, the unit will automatically scan

and store radio station

3. Press the down or up button to fine tune radio station

ALARM SETTING

1. To enter Alarm1, press the Alarm1/Alarm2 button once, Alarm1 appears on the display

2. To set Alarm1, press the Time Set button once the alarm hour flashes

4. To confirm and enter Alarm Minutes mode, press the Time Set button again. The alarm minutes will flash on the display

5. Press the up or down button until you reach the desired minute

6. To confirm, press the Alarm Set button

7. To enter Alarm2, press the Alarm1/Alarm2 button again. Alarm2 will appear on the display

8. To set Alarm2, repeat steps 2-6

9. Please find the different Alarm mode (iPod, radio, buzzer) at the back of the unit

SETTING THE CLOCK

1. To enter hour mode, press the time set button for 2 seconds, the hour flashes on the display

2. To set the hour, press the up or down button until you reach the desired time

3. To confirm and enter minute mode, press the time set button again, the minute will flash on the display

4. To set minutes, press the up or down button until you reach the desired time

5. To confirm and exit, press the Time Set button again

SNOOZE NAP SLEEP SETTING

1. Snooze/nap/sleep button have 3 functions

2. Snooze: to activate the snooze function, press the snooze/nap/sleep button when the alarm sounds. The alarm turns off

and snooze appears on the display, the alarm sounds again after 9 minutes

3. Nap: to select a nap period of 15,30,45,60 minutes when the power is off, press the snooze/nap/sleep button 1,2,3,4 times,

respectively. The alarm sounds automatically at the time selected. To switch off the nap function, press the

snooze/nap/sleeep/button again

4. Sleep: to select a sleep period of 15,30,45 or 60 minutes, press the snooze/nap/sleep button 1,2,3,4 times, respectively.

The music playing turns off automatically at the time selected

CHARGING iPod BATTERY

CONNECT TO YOUR MP3 OR MP4

1. Press the FUNCTION button to the AUX mode

2. Put one end of the AUX Jack cable into the MP3 or MP4

Frequency: FM87.5-108MHz

Antenna FM: Wire Antenna

Power required: DC 9V, 6x1.5V AA/UM3 battery for play and time memory

Adapter:

Max Power Outpower: 1.6W

10% THD Power Outpower: 1.5W

DC9V 1000mA

Dual Alarm Clock Radio For iPod

BCR002IP

4

3. Press the up or down button until you reach the desired hour

1. Connect the iPod to Dock connector and plug the AC adapter

Advertising