Bird Technologies 613-8 Series - Manual

Digital Signal Booster
613-8-Series
Bird Technologies, TX RX Systems Digital Signal Booster operates in the 700/800 MHz range with 1-60
programmable digital filters for both uplink and downlink. Filter center frequency and characteristics
are fully programmable to meet the demands of various systems and signals such as APCO 25 phase II. Filter
bandwidth is user programmable from 6.25 kHz to 15 MHz. All state-of-the-art product components
are protected by a NEMA 4 style enclosure to meet the demands of the NFPA requirements. Intuitive
web browser interface allows booster to be easily configured for changing RF environments.
PROBLEMS } SOLUTIONS
Noise and Interference that cause communication problems
in a crowded spectrum.
} Digital booster can amplify several individual channels or
narrow bands of frequencies (amplifying the desired
spectrum and preventing interference to other users).
Changes in RF environment.
} An intuitive web browser user interface offers not only
local but also remote access from any compatible PC on
the network maximizing flexibility to easily implement
system changes such as output power, center frequency,
filter shape, and group delay.
System coverage is difficult to assess.
} Built-in pilot signal capability. The 1 kHz FM modulated
carrier allows simple SINAD qualification testing.
APPLICATIONS
The Digital booster provides Public Safety grade reliability
and coverage in challenging disadvantaged RF conditions.
Use as head-end booster for a system that is donored “off the
air” in an RF congested area.
One digital booster can connect to any number of broadband
boosters (SBII or SBI).
Minimizes noise and interference potential in urban RF
congested areas.
SignalBooster_Digital_2012 branding 2/26/2013 2:35 PM Page 1