Bird Technologies 91-00-114 - Manual

Bird ® Technologies Group, consisting of Bird ® Electronic Corporation and TXRX Systems ® , is a global, innovative supplier of RF products, systems, services and educational solutions.
Bird ® Technologies Group reserved the right to modify specifications or discontinue any product without notice.
www.bird-technologies.com 440.248.1200/866.695.4569 [email protected]
Antenna Clamps
• Pipe-to-pipe clamps allow the parallel connection of two similar or dissimilar sized pipes.
• Typically used to attach stand-off mounts or pipes to tower legs.
• Utilize 3/16" thick clamp halves.
• Manufactured from hot dipped galvanized steel.
• Either 2 clamps per set or 3 per set depending on the length of the antenna
680 AntennaClamp-DS09072006
91-00-104 (2 per set)
or 91-00-114 (3 per set)
Antenna Mounting Clamps Selection Guide
Models Description Fits Antennas
91-00-101
91-00-111
Joins two 1.9" OD to 4.25" OD round members.
For straight or tapered legs.
Model numbers that start with "101" and "CC"
Use 91-00-111 for antennas longer than 15 ft.
91-00-104
91-00-114
Joins two 1.5" OD to 3.5" OD round members.
For straight or tapered legs.
Model numbers that start with "BA", "EA", "OA", and "COL"
Use 91-00-114 for antennas longer than 15 ft.
91-00-101 (2 per set)
or 91-00-111 (3 per set)