BOXLIGHT CP-13t - Manual (Page 21)

21
BASIC OPERATION
ADJUSTING THE IMAGE
The message disappears after 4 seconds.
The message disappears after 4 seconds.
ZOOM ADJUSTMENT
1 Press the ZOOM button on the Top Control or the ZOOM ▲ / ▼
button on the Remote Control Unit to turn into the ZOOM
mode.
2 Press the POINT UP button or the ZOOM ▲ button to have the
image larger, and press the POINT UP button or the ZOOM ▼
button to have the smaller.
FOCUS ADJUSTMENT
1 Press the FOCUS button on the Top Control or the FOCUS
▲ / ▼ button on the Remote Control Unit to turn into the FOCUS
mode.
2 Adjust the focus of the image by pressing the POINT
UP/DOWN button or the FOCUS
▲ / ▼ button.
KEYSTONE ADJUSTMENT
1 Press the KEYSTONE ▲ / ▼ button on the Remote Control Unit
or select the Keystone on the SCREEN menu. (Refer to page
29, 30, 37.) The message “Keystone” is displayed.
2 Correct the Keystone distortion by pressing the KEYSTONE
▲ / ▼ button or the POINT UP/DOWN button(s). Press the
KEYSTONE ▲ button or the POINT UP button to reduce the
upper part or the image, and press the KEYSTONE ▼ button or
the POINT DOWN button to reduce the lower part.
The message disappears after 4 seconds.
Reduce the upper width with the KEY STONE ▲
button or the POINT UP button.
Reduce the lower width with the KEY STONE ▼
button or the POINT DOWN button.
In the Computer mode, the image can be expanded, compressed,
and panned with the Digital Zoom function. Refer to page 29, 37 for
the Digital Zoom operation.
Zoom
Focus
Keystone
If the picture obtained keystone distortion, correct screen with KEYSTONE adjustment.