Operating instructions, Remote controller, English – Beko LG-BKE 6450 D User Manual

Page 7: Signal receptor, Operation indication lamps, Storage and tips for using the remote control

Advertising
background image

Operating Instructions

Owner’s Manual 7

ENGLISH

Signal

receptor

Operation indication lamps

Operating Instructions

Remove the battery cover by pulling it according to
the arrow direction.

Insert new batteries making sure that the (+) and (-)
of battery are installed correctly.

Reattach the cover by sliding it back into position.

: Use 2 AAA(1.5volt) batteries.

Do not use rechargeable batteries.

NOTICE

• The remote control may be stored by mounting it on a

wall.

• To operate the room air conditioner, aim the remote

control at the signal receptor.

Signal Receptor

Receives the signals from the remote control.(Signal receiving sound: two short beeps or one long beep.)

Operation Indication Lamps

On/Off

: Lights up during the system operation.

Sleep Mode

: Lights up during Sleep Mode Auto operation.

Timer

: Lights up during Timer operation.

Defrost Mode

: Lights up during Defrost Mode or Hot

Start operation (Heat pump model only)

: Lights up during outdoor unit operation.

(Cooling model only)

OUT

DOOR

OUTDOOR UNIT
OPERATION

Storage and Tips For Using the Remote Control

Remote Controller

Lights up during Sleep Mode Auto operation.

PLASMA

Plasma

: Lights up during plasma operation (Plasma model only)

88

: Indicates the setting temperature
(Plasma model only)

ON

INDOOR UNIT
OPERATION

:Lights up during indoor unit operation.(Optional)

Advertising
This manual is related to the following products: