Blizzard Lighting Seven-4 ProPar (Rev A) - Manual (Page 13)

Page 13
ProPAR 7.4 Manual Rev. A Copyright (c) 2012 Blizzard Lighting, LLC
NOTE: After making any adjustment, hold the <MENU> button for approximately
3 seconds, otherwise the fixture will return to the correct mode after
approximately 10 seconds.
DMX Values In-Depth (7-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Master Dimmer (Slow <--> Fast)
2 000 <--> 255 Red Intensity (0% <--> 100%)
3 000 <--> 255 Green Intensity (0% <--> 100%)
4 000 <--> 255 Blue Intensity (0% <--> 100%)
5 000 <--> 255 White Intensity (0% <--> 100%)
6 000 <--> 255 Strobe (0-15 off, 16-255 strobe slow <-> fast)
7 000 <--> 255 Color Macros (slow <-> fast)
DMX Values In-Depth (4-Channel Mode)
Channel Value What It Does
1 000 <--> 255 Red Intensity (0% <--> 100%)
2 000 <--> 255 Green Intensity (0% <--> 100%)
3 000 <--> 255 Blue Intensity (0% <--> 100%)
4 000 <--> 255 White Intensity (0% <--> 100%)
Troubleshooting
Symptom Solution
Fixture Auto-
Shut Off
Check the fan in the fixture. If it is stopped or moving slower
than normal, the unit may have shut itself off due to high
heat. This is to protect the fixture from overheating. Clear
the fan of obstructions, or return the unit for service.
Beam is Dim Check optical system and clean excess dust/grime. Also
ensure that the 220V/110V switch is in the correct position, if
applicable.
No Light Output Check to ensure fixture is operating under correct mode, IE
sound active/auto/DMX/Etc., if applicable. Contact service for
more information.
Chase Speed
Too Fast/Slow
Check to ensure proper setup of speed adjustment.
No Power Check fuse, AC cord and circuit for malfunction.
No Response to
Audio
Verify that the fixture is in “Sound Active” mode.
Adjust Audio Sensitivity, If Applicable.
Fixture Not
Responding /
Responding Er-
raticly
Make sure all connectors are seated properly and securely.
Use Only DMX Cables.
Install a Terminator.
Check all cables for defects.
Reset fixture(s).