Page 15, Dmx values in-depth (6-channel mode), Dmx values in-depth (3-channel, hsv mode) – Blizzard Lighting Seven-6 ProPar User Manual

Page 15: Troubleshooting

Advertising
background image

Page 15

ProPAR 7.6 Manual Rev. A

© 2014 Blizzard Lighting, LLC

DMX Values In-Depth (6-Channel Mode)

Channel Value

What It Does

1

000 <--> 255 Red Intensity (0% <--> 100%)

2

000 <--> 255 Green Intensity (0% <--> 100%)

3

000 <--> 255 Blue Intensity (0% <--> 100%)

4

000 <--> 255 Amber Intensity (0% <--> 100%)

5

000 <--> 255 White Intensity (0% <--> 100%)

6

000 <--> 255 UV Intensity (0% <--> 100%)

DMX Values In-Depth (3-Channel, HSV Mode)

Channel Value

What It Does

1

000 <--> 255 Hue (0% <--> 100%)

2

000 <--> 255 Saturation (0% <--> 100%)

3

000 <--> 255 Value (0% <--> 100%)

Troubleshooting

Symptom

Solution

Fixture Auto-Shut

Off

Check the fan in the fixture. If it is stopped or moving slower than

normal, the unit may have shut itself off due to high heat. This is to

protect the fixture from overheating. Clear the fan of obstructions,

or return the unit for service.

Beam is Dim

Check optical system and clean excess dust/grime. Also ensure that

the 220V/110V switch is in the correct position, if applicable.

No Light Output

Check to ensure fixture is operating under correct mode, IE sound

active/auto/DMX/Etc., if applicable.

Chase Speed Too

Fast/Slow

Check to ensure proper setup of speed adjustment.

No Power

Check fuse, AC cord and circuit for malfunction.

Blown Fuse

Check AC cord and circuit for damage, verify that moving parts are

not restricted and that unit’s ventilation is not obstructed

Slow Movement

Verify that 220V/110V switch is in the correct position, if applicable.

Also check that speed channels are set appropriately.

No Response to

Audio

Verify that the fixture is in “Sound Active” mode.

Adjust Audio Sensitivity, If Applicable.

Fixture Not

Responding /

Responding Er-

ratically

Make sure all connectors are seated properly and securely.

Use Only DMX Cables and/or check cables for defects

Install a Terminator.

Reset fixture(s).

Fixture Moving

On Its Own

Verify proper mode of operation. Is the fixture in “Auto” mode?

If your problem isn’t listed, or if problems persist,

please open a support ticket at www.blizzardlighting.com/tickets.

Advertising