Blizzard Lighting Q12A The Puck (Rev C) - Manual (Page 11)

Page 11
The Puck Q12A / Q12W Manual Rev. C Copyright (c) 2011-12 Blizzard Lighting, LLC
To set a custom color in Master/Slave / Standalone Mode:
Using this function, you can select any color by adjusting the Red, Green, Blue and Amber
/ White values from 0-255. You may also adjust the color balance of the fixture.
Please note that modifying the values in this step will affect ALL modes, therefore
we recommend resetting all levels to their highest value (255) after using this
mode.
1.) Select
NAnu
from the control panel, then hit <ENTER>.
2.) Choose
rEd, GrEE
,
bLuE
or
UhIT
then hit <ENTER> to confirm.
3.) Using the <UP>/<DOWN> keys, select the color you wish to display by
varying Red/Green/Blue intensity between 0 and 255, then hit <ENTER> to
confirm each color choice.
4.) Select Color preset mode as instructed above, then select
CoL 15.
then
<ENTER> to confirm.
To Show the Fixture Running Hours:
1.) Select
FhrS
from the control panel, then hit <ENTER> to confirm.
Stuck? Want More
Information?
Check out our
helpful tutorial video
HERE:
http://youtu.be/xVKhmV-v0jA
That should tell you everything you need to
know!