Blizzard Lighting wiCICLE Wireless DMX System - Manual

Man, you are one cool customer. You just bought the slickest
little wireless DMX system out there, brother. We tip our cap to
you.
Scarcely bigger than the end of a
microphone cord but so, so much
cooler... the wiCICLE™ Wire-
less DMX system. 2.4Ghz, 512
autoselecting channels, shiny,
and works like a dream.
If this were a playground, it
would be the fi rst kid picked for
kickball, and now it’s yours. In a
word... Booyah. There, we said
it. Now read these instructions
quick so you can start playin’!
PRODUCT FEATURES / SPECS
· 7 Channel Groups with autoselecting channels (512 Channels total)
· 2.4Ghz ISM Band Operation for dropout-free performance
· Max. Operating Range: 300FT line-of-sight
· Max. Transmitter Power: 20dBm
· Receiver Sensitivity: -94 dBm
· Power Requirements: 5VDC, 1A.
· Signal Connector: 3-pin “XLR” Male/Female connector
· Warrant: Sweet Cherry Pie.
· Warranty: 2 Years (See Flipside for Details.)
HOW TO WORK IT:
1. Power on the wiCICLE™ Transmitter and Receiver.
2. Press the button on the Transmitter to select the operating channel group.
The 7-Color Status LED will change color to indicate the current channel
group:
· GROUP 1: RED
· GROUP 2: GREEN
· GROUP 3: YELLOW
· GROUP 4: BLUE
· GROUP 5: VIOLET
· GROUP 6: CYAN
· GROUP 7: WHITE
3. Follow the same procedure on the Receiver to select the channel group.
4. Once both the transmitter and receiver(s) are both set to the same chan-
nel group, connect the transmitter to the DMX controller or the DMX out
of a fi xture on your DMX chain. Connect the receiver to the fi xture you
wish to control.
5. Once a DMX signal is provided to the transmitter, the status LED will
blink red slowly until communication is established with the receiver. The
status LED on the receiver(s) will fl ash green slowly until communication
is established.
6. Once the clearest channel is auto-selected, both the transmitter and
receiver status LEDs will blink quickly.
7. That’s It!
CAUTION!
· There are no user servicable parts inside. Do not open the unit. Doing so
will void your warranty and subject you to all sorts of bad karma.
· This unit is designed for indoor use only. Keep it dry and out of the sun.
(Like a chocolate bar.)
· Operating environment: 0-104 degrees F. <90% RH.
· If you have a problem, just call or email! We’re here to help!
THANK YOU FOR YOUR PURCHASE, WE REALLY APPRECIATE IT!
-- THE TEAM @ BLIZZARD LIGHTING
HAVE A PROBLEM? NEED HELP? WANNA LEARN MORE?
CALL 414.979.5781/ WEBSITE: WWW.BLIZZARDLIGHTING.COM
EMAIL: [email protected]
BLIZZARD LIGHTING, LLC. · PO BOX 1874 · BROOKFIELD, WI 53008 USA
Man, you are one cool customer. You just bought the slickest
little wireless DMX system out there, brother. We tip our cap to
you.
Scarcely bigger than the end of a
microphone cord but so, so much
cooler... the wiCICLE™ Wire-
less DMX system. 2.4Ghz, 512
autoselecting channels, shiny,
and works like a dream.
If this were a playground, it
would be the fi rst kid picked for
kickball, and now it’s yours. In a
word... Booyah. There, we said
it. Now read these instructions
quick so you can start playin’!
PRODUCT FEATURES / SPECS
· 7 Channel Groups with autoselecting channels (512 Channels total)
· 2.4Ghz ISM Band Operation for dropout-free performance
· Max. Operating Range: 300FT line-of-sight
· Max. Transmitter Power: 20dBm
· Receiver Sensitivity: -94 dBm
· Power Requirements: 5VDC, 1A.
· Signal Connector: 3-pin “XLR” Male/Female connector
· Warrant: Sweet Cherry Pie.
· Warranty: 2 Years (See Flipside for Details.)
HOW TO WORK IT:
1. Power on the wiCICLE™ Transmitter and Receiver.
2. Press the button on the Transmitter to select the operating channel group.
The 7-Color Status LED will change color to indicate the current channel
group:
· GROUP 1: RED
· GROUP 2: GREEN
· GROUP 3: YELLOW
· GROUP 4: BLUE
· GROUP 5: VIOLET
· GROUP 6: CYAN
· GROUP 7: WHITE
3. Follow the same procedure on the Receiver to select the channel group.
4. Once both the transmitter and receiver(s) are both set to the same chan-
nel group, connect the transmitter to the DMX controller or the DMX out
of a fi xture on your DMX chain. Connect the receiver to the fi xture you
wish to control.
5. Once a DMX signal is provided to the transmitter, the status LED will
blink red slowly until communication is established with the receiver. The
status LED on the receiver(s) will fl ash green slowly until communication
is established.
6. Once the clearest channel is auto-selected, both the transmitter and
receiver status LEDs will blink quickly.
7. That’s It!
CAUTION!
· There are no user servicable parts inside. Do not open the unit. Doing so
will void your warranty and subject you to all sorts of bad karma.
· This unit is designed for indoor use only. Keep it dry and out of the sun.
(Like a chocolate bar.)
· Operating environment: 0-104 degrees F. <90% RH.
· If you have a problem, just call or email! We’re here to help!
THANK YOU FOR YOUR PURCHASE, WE REALLY APPRECIATE IT!
-- THE TEAM @ BLIZZARD LIGHTING
HAVE A PROBLEM? NEED HELP? WANNA LEARN MORE?
CALL 414.979.5781/ WEBSITE: WWW.BLIZZARDLIGHTING.COM
EMAIL: [email protected]
BLIZZARD LIGHTING, LLC. · PO BOX 1874 · BROOKFIELD, WI 53008 USA