Blomberg GSN 9580 A - Manual (Page 31)

30 EN
Programming the washing
time
Time Delay
You can delay the start of the selected
programme up to 18 hours. Time Delay
can not be set after the programme
starts.
1. Press Time Delay key to enter the
Time Delay menu.
2. Display information line will display
“0:00” and Sandglass indicator will
start flashing.
3. Press > or < Selection keys to
set the desired time delay. > key
increases the delay time by steps
of 30 minutes and < key decreases
it by steps of 30 minutes.
4. Press Start / Pause / Cancel key
to start countdown for the time
delay. Sandglass will continuously
light until the end of countdown.
Time Delay is displayed on the
Time Delay indicator. Selected
programme will start as soon as
the countdown is over. Then, the
time needed for completion of the
running programme appears on the
display.
Press Time Delay key again
to return to the Main Menu
(programme selection screen)
without setting any time delay in
the Time Delay Menu.
Confirmation key does not have
any function in Time Delay menu.
System does not react when this
key is pressed.
To change a programme or function
when time delay is active
1. Press Start / Pause / Cancel key to
switch the machine in pause mode.
Countdown stops and Sandglass
indicator starts flashing.
2. After the countdown stops, change
the washing programme and add
or remove auxiliary functions as
described in “Programme selection”
and “To add auxiliary function to
the programme” sections.
3. Press Start / Pause / Cancel key to
start countdown for the time delay.
When you press the key without
switching the machine into Pause
mode, “Time Delay Active!” warning
will be displayed.
To set a new time delay when the
time delay is already active
1. Press Start / Pause / Cancel key to
stop the countdown.
2. Press Time Delay key to enter the
Time Delay menu.
3. Press > or < Selection keys to set
the new time delay.
4. Press Start / Pause / Cancel key to
start countdown for the time delay.
To cancel the Time Delay function
Press Start / Pause / Cancel key for
3 seconds. “Cancel...X” appears on
display. X denotes the time in seconds
you need to keep the key pressed.
Starting the programme
Press Start / Pause / Cancel key to
start the programme. Start ( ) indicator
will appear on the display.
Programme time will appear on the
Remaining Time indicator.
Your machine performs water
softening depending on the
hardness level of the supply water.
Remaining time displayed towards