Blomberg GSN 9585 A - Manual (Page 32)

31 EN
the end in some programmes can
be different from the time indicated
at the beginning due to this
process. The total time can also
change while the programme is
running depending on the ambient
temperature where your machine is
installed, temperature of the supply
water and amount of the dishes.
Child (Key) Lock
You may prevent other people
from interrupting and changing the
programme cycle and time delay while
the machine is running.
To activate the child lock:
Press Time Delay and Confirmation
keys together for 3 seconds after the
programme has started. “Enabling
Keylock...X” appears on display. X
denotes the time in seconds you need
to keep the key pressed. All keys
are locked at the end of this period,
“Keylock Activated” will appear on the
display and Child Lock indicator will
turn on. All keys will be nonfunctional
when Child Lock is selected.
To deactivate the child lock:
Press Time Delay and Confirmation
keys together for 3 seconds.
“Unlock...X” appears on display. X
denotes the time in seconds you need
to keep the key pressed. Key lock is
deactivated and “Keylock Deactivated”
appears on display at the end of this
period. Key Lock indicator turns off.
Programme follow-up
You can follow-up the washing step
in which the current programme is in
from the Programme Steps Follow-up
indicators on the display.
“ ” Prewash step follow-up indicator
“ ” Main Wash step follow-up indicator
“ ” Rinsing step follow-up indicator
“ ” Drying step follow-up indicator
“ ” End of Programme indicator
The machine will remain silent in
Pause mode for about 15 minutes
in order to remove the water in
the machine and on the dishes
completely and to have the water
softener cleaned. And then it will
resume running in Drying mode and
the Drying step indicator will turn on.
As soon as the programme is
completed, “Finished” will appear on the
display and End of Programme follow-
up indicator will turn on. Remaining time
indicator displays “00:00”.
If you did not turn of the audio signal of
the machine by setting the Volume to 0,
then it will warn you with the melody you
have selected. You may mute the audio
warning by pressing any key except
the Start / Pause / Cancel key or by
opening the door. If you do not take any
action, the audio warning will also stop
automatically after 2 minutes.
Changing a programme
To change your selection after the
programme has started:
1. Press Start / Pause / Cancel key to
switch the machine in pause mode.