2radio interference 3 installation, Important – Blomberg MEE 2150 X User Manual

Page 5

Advertising
background image

EN

5

2

Radio Interference

3

Installation

IMPORTANT

The wires in this mains lead are coloured

in accordance with the following code:

Green-and-yellow :

Earth

Blue :

Neutral

Brown :

Live

As the colours of the wires in the

mains leads of the appliance may not

correspond with the coloured markings

identifying the terminals in your plug,

proceed as follows:

The wire which is coloured green-and-

yellow must be connected to the terminal

in the plug which is marked with the letter

E or by the earth symbol coloured

green of green-and-yellow.

The wire which is coloured blue must

be connected to the terminal which is

marked with the letter N or coloured

black.

The wire which is coloured brown must

be connected to the terminal which is

marked with the letter L or coloured red.

Microwave oven may cause interference
to your radio, TV, or similar equipment.
When interference occurs, it may be
eliminated or reduced by the following
procedures.

a. Clean the door and sealing surface

of the oven.

b. Place the radio, TV, etc. as far

away from your microwave oven as
possible.

c. Use a properly installed antenna for

your radio, TV, etc. to get a strong
signal reception.

1. Make sure all the packing materials

are removed from the inside of the
door.

2. Inspect the oven after unpacking

for any visual damage such as:

- Misaligned Door

- Damaged Door

-

Dents or Holes in Door Window
and Screen

- Dents in Cavity

- If any of the above are visible, DO
NOT use the oven.

3. This Microwave Oven weighs

15.5 kg and must be placed on a
horizontal surface strong enough to
support this weight.

4. The oven must be placed away

from high temperature and steam.

5. DO NOT place anything on top of

the oven.

6. DO NOT remove the turn -table

drive shaft.

7. As with any appliance, close

supervision is necessary when used
by children.

WARNING - THIS APPLIANCE MUST

BE EARTHED.
1. The plug socket should be within

easy reach of the power cord.

2. This oven requires 1.5 KVA for its

input. consultation with service
engineer is suggested when
installing the oven.

CAUTION: This oven is protected
internally by ac 250V,10 Amp Fuse.

Advertising