Blomberg WMF 9649 WZE50 - Manual (Page 11)

11 / 48 EN Washing Machine / User’s Manual
• smartCARE (Self Clean)
Use this programme regularly (once in every 1-2 months) to
clean the drum and provide the required hygiene. Run the
programme without any laundry in the machine. To obtain
better results, put powder limescale remover for washing
machines into the detergent compartment II. When the
programme is over, leave the loading door ajar so that the
inside of the machine gets dry.
C
This is not a washing programme. It is a maintenance
programme.
C
Do not run the programme when there is something in
the machine. If you try to do so, the machine detects
that there is a load inside and aborts the programme.
4.7 Special programmes
For specific applications, select any of the following
programmes.
• Rinse
Use this programme when you want to rinse or starch
separately.
• Spin + Drain
Use this programme to drain the water in the machine.
4.8 Temperature selection
Whenever a new programme is selected, the recommended
temperature for the programme appears on the temperature
indicator. It is possible that the recommended temperature
value is not the maximum temperature that can be selected
for the current programme.
Depending on the temperature you have selected, “Low
Efficient”, “Efficient” or “High Efficient” appears on the
display.
Press the Temperature Adjustment button to change the
temperature. Temperature will decrease by steps of 10 °C.
C
Temperature Adjustment button only serves for
decreasing the temperature.
Finally, “-” symbol indicating the cold wash option appears
on the display. "Cold Wash" appears on the display.
Cold Wash
C
The frame of temperature indicator is off in the
programmes that do not allow temperature adjustment.
When you press the Temperature Adjustment button,
"Unadjustable" appears on the display.
Unadjustable
You can also change the temperature after the washing
starts. If the Temperature indicator's frame is illuminated
after the wash cycle has started, you can select the
desired temperature. If the wash cycle has reached a point
where you cannot change the temperature, the frame of
temperature indicator turns off.
C
If you scroll to cold wash option and press Temperature
Adjustment button again, the recommended maximum
temperature for the selected programme appears on the
display. Press the Temperature Adjustment button again
to decrease the temperature.
4.9 Selecting the spin speed
Whenever a new programme is selected, the recommended
spin speed of the selected programme is displayed on the
Spin Speed indicator.
C
It is possible that the recommended spin speed value is
not the maximum spin speed that can be selected for
the current programme.
Press the Spin Speed Adjustment button to change the
spin speed. Spin speed decreases gradually.
Then, depending on the model of the product, "Rinse Hold"
and "No Spin" options appear on the display.
C
Spin Speed Adjustment button only serves for
decreasing the spin speed.
C
Rinse Hold option is indicated with “ı_ı” symbol and No
Spin option is indicated with “_” symbol.
If you are not going to unload your laundry immediately after
the programme completes, you can use Rinse Hold function
in order to prevent them from getting wrinkled when there is
no water in the machine.
This function holds the laundry in the final rinsing water.
Rinse Hold
If you want to spin your laundry after the Rinse Hold function: