Bissell SPOT LIFTER 1718 series - Manual (Page 10)

10
T
roubleshooting
Reduced Spray / no Spray
Possible Cause Remedies
1. Solution tank is empty 1. Refill solution tank
2. Pump not primed 2. While Spot Lifter is turned on, press
spray trigger and gently rock Spot Lifter
back and forth
3. Batteries weak/undercharged 3. Recharge according to instructions
4. Spray tip clogged 4. Rinse tip with clean water
Spot Lifter is not powered / underpowered
Possible Cause Remedies
1. Charger / plug not connected 1. Make sure charger plug is completely
plugged into wall outlet and charging
cord is completely plugged into port on
back of unit. Make sure Spot Lifter is
stored with power switch in "
O
"
(off) position
Spot Lifter will not charge
Possible Cause Remedies
1. Charger / plug not connected 1. Make sure charger plug is completely
plugged into wall outlet and charging
cord is completely plugged into port on
back of unit. Make sure Spot Lifter is
stored with power switch in "
O
"
(off) position
2. Batteries have charging resistance 2. To recharge, first completely exhaust the
battery, recharge it, then exhaust it once
again before recharging a second time.
This procedure may be required more
than once.
Other Maintenance or Service not included above should be performed by
an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store
For any questions or concerns, BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691.
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1