BLUESHAPE BUBBLEPACK User Manual
Page 2
2
The user is being alerted of the importance of going
through the literature accompanying this product and
getting familiarised with the important safety and
operating instructions, included.
Moreover, please follow the safety instructions below.
•
Read the supplied instructions thoroughly and keep handy.
•
Protect the equipment from humid environments. Avoid any
contact with water or other fluids. Do not use if any liquid has
been accidentally spilled inside the equipment.
•
Unplug when not in use and avoid careless overload or short
circuits.
•
Unplug and switch off the charger if not in use.
•
It is recommended to send the unit to sleep mode when not in
use to avoid self-discharge.
•
Avoid allowing the battery discharge to extremely low levels. It
is recommended to charge it periodically to a reasonable level
(say 50% or 3 LEDs) even when not in use.
•
Avoid setting up near extreme heat sources such as in
scorching sunshine, fire places, radiators, stoves or other heat
generating equipment
•
Do not remove cover or dismantle the apparatus. No user-
serviceable parts inside
•
Use only as instructed by the manufacturer. If the equipment
develops a fault, have it repaired by qualified service personnel
only
•
The equipment probably may become rather warm or even
hot during operation. This is not a sign of malfunction since
this equipment is designed and tested to withstand this. All
this is to be expected due to the high power handling of the
device within such a small volume.