BLUESHAPE MVBELTS - Manual (Page 2)

Rev 2.0 - 2008 page 2
Connection diagram:
Diagram showing polarity of female in-line XLR connector provided with this unit
Technical Specifications:
Connection V-Lock type
XLR - pin 1 Ground 0V (-ve)
XLR - pin 2 Not connected
XLR - pin 3 Not connected
XLR - pin 4 Supply (+ve) 11V ~ 16.8V DC
Output
Voltage
D-Tap 11V to 16.8V - max 5A (70 W)
Important note: if XLR and D-Tap 11 to 16.8V sources are both in use, then max power of 70W is
to be shared between both
Dimensions
142 x 82 x 40 mm
Weight 500 g
* Refer to connection diagram above
Warranty:
BLUESHAPE MVBELTS belt mount systems are warranted to be free from defects in materials,
workmanship and functionality for a period of 18 months commencing from the date of purchase.
This warranty shall not apply to any products or parts of, that have been subjected to misuse,
negligence, accidental or abnormal conditions of operation.
The buyer should always contact the place of purchase for any return of defective product. It is
important that the buyer provides us with as much information as possible about the failure being
claimed.
In the event of product failure for which warranty applies, we will repair or replace the product free of
charge. In these cases, all expenses including transport charges will be borne by us.
In the case where the failure has been caused by one of the causes explained above, repairs shall be
billed at a nominal cost. Prior to the carrying out of any repairs, we will inform the customer of the
estimated costs of these repairs.
These warranty conditions are the only ones applicable to our products and overrule any other
expressed or implied warranties. We shall not be held liable for any damages resulting from warranty
statements other than those contained in this declaration.
In all warranty claims, the buyer must reproduce the original purchase invoice.