BLUESHAPE MVQUICKAB Hot-Swap adapter - Manual (Page 3)

3
Introduction
MVQUICKAB is a hot swap system to be installed as a battery
interface between a V-lock battery and a camera (or any other 3-
Stud gold mount compatible device).
The main purpose is to allow camera battery replacement without
any power interruption through an automatic detection of the battery
removal.
Additionally, MVQUICKAB provides an alternative power source of
about 21Wh to be used as UPS in case of a sudden power failure or
extended power requirements.
MVQUICKAB graphic description
1. Installation interface for external V-Lock battery
2. D-Tap connector (on opposite site, not visible in drawing)
D-Tap rating at 14.8 V / 5 A max. 70 Watts
3. LED indicators showing state of charge of internal battery
4. Bottom with 3-Stud gold mount
5. Charging connector
1
3
2
4
5