Steps, Installation, Antenna – BUSH IDLED2402DVD User Manual
Page 9: Rear sockets, Side sockets
INSTALLATION
8
STEPS:
PC
Ensure the TV and your computer are both set
to power off before your connect.
1.Connect the VGA Input & PC Audio Input as
above.
2.Connect power supply again to your TV set.
3.Turn on the TV and then press the SOURCE
Buttons to select PC mode.
4.Then turn the PC power on.
ANTENNA
Note:
Aerial Connections: IEC(female).
Input Impendance: 75 unbalanced.
Rear Sockets
Outlined below is the Rear Sockets provided
AV Input, R/L Audio Input, DC Power Source Input, YPbPr Input and HDMI2 Input.
When HDMI 2 is connected with DVI video source, the R/L of AV will be used
for audio source input.
Note: 1. The AV Input and YPbPr Input share one audio channel.
2.
Side Sockets
Outlined below is the Side Sockets provided
HDMI1 Input, USB Input, PC Audio Input, AV Output, VGA Input and RF Input.
Note: When HDMI 1 is connected with DVI video source, the "PC audio input" will be
used for audio source input.
USB
PC AUDIO
VGA
RF
HDMI1
AV
L
R
AV OUTPUT
USB
PC AUD O
VGA
RF
HDMI1
AV
L
R
AV OUTPUT
AV
L
R
Y
Pb
Pr
HDMI2
DC 12V/3A