Support – BLUESHAPE BSCVMon v2.0 User Manual
Page 6
Advertising
3.
Press down the connector
until locked
When BSCVMon is launched, it monitors any connected cables (up to a maximum of 4) and any chargers connected
through them, if these are switched on.
The USB cables can be connected directly to USB ports or through hubs.
Each single computer can support a maximum of 4 cables.
Support
For support please contact the Blueshape® support team on the following numbers:
Tel: +39-0522-518556
Fax +39-0522-277084
Additionally, you can contact us by
to retrieve additional information
Created with the Standard Edition of HelpNDoc:
Advertising