BMI Racing Copperhead 12 - Manual (Page 2)

1. .050”, 1/16” and 3/32” Allen wrenches
2. A #2 Phillips Screwdriver
3. 3/16” and 11/32” nut drivers
4. A pair of needle nose pliers
5. A pair of slip join pliers
6. A hobby knife
7. A ruler or calipers
8. A file
9. A soldering iron
10. Diff Grease
11. Electric Motor Cleaner Spray
12. 50wt silicon shock oil (for center shock)
13. 10,000wt silicon diff oil (for damper tubes)
Items needed to assemble your
Copperhead 12
1. Two channel surface Radio system
2. A mini servo*
3. 3.7 volt LiPo battery packs
4. A battery charger
5. A Brushless electronic speed control
6. Brushless electric motor
7. A 64 pitch pinion gear
8. A small servo saver.
9. 1/12 th scale body
10. 1/12 th scale tires
Items needed to operate your Copperhead 12
Message from BMI Racing
The Copperhead 12 is a revolutionary step forward in 1/12th scale car design. We spent the last year
refining the proven DB12RR LiPo edition racing machine. The goal of the Copperhead 12 project was to take
the best features of the DB12RR and make a new type of rear suspension that will set new standards for
speed, versatility and ease of use. The Copperhead 12 was designed to be race tuned for any traction level. It
has been proven on lower traction asphalt tracks all the way to the highest traction carpet tracks.
Here at BMI Racing, we put quality before quantity. Unlike a lot of cars available, we make all of our parts in
house. From pivot balls to carbon fiber components, every part is guaranteed to be the highest quality. We do
not sacrifice anywhere on our products. Every part is inspected for quality.
Please read through the instruction manual carefully. Even if you are an experienced R/C racer, there are
some details about the Copperhead 12 that are different than other cars. To get the most out of your kit you
must have it assembled correctly. Have fun building and racing your new race car. As always, we here at BMI
Racing appreciate your support
With Regards,
Jason Breiner
BMI Racing