BMI Racing Copperhead 10 - Manual (Page 12)

Mounting Electronics
The “Center Mass“ chassis layout of the Copperhead 10 is one of the features that really puts this car
ahead of the pack. This chassis design moves the batteries forward and places the electronics between the
battery and the motor pod.
This accomplishes two things.
1. The batteries are moved forward to obtain the proper weight distribution.
2. The electronics are located in the most efficient location (short power wires, tidy receiver wiring).
You have the option of running the batteries down the center or across the chassis as shown in the
picture. This will give you the option to run your electronics however you may choose. We recommend
running them as shown as it did yield the best overall result. However the option is there.
Note:
There is an antenna mount hole in the chassis for racers using non 2.4GHz receivers. An antenna
mount is not supplied in the kit.