Boomba Racing SRT-4 Dodge Engine Mounts Bolts Set - Manual

Racing, inc. Racing, inc.
Www.boombaracing.com
TORQUE ARMS
INSTALLATION MANUAL
MATERIALS REQUIRED
None
1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place). 1 When lifting the car
always use stands to
secure the car. 2 Remove right wheel (passenger side). 3 4 Remove splashguard.
5 Loosen up the tie bar remove the bottom
nut, loosen the top nut and move the bar
to the side. 6 Remove completely the bottom mount
screws. 7 Remove the bottom mount. 8 Remove the top mount bolts.
9 Remove the top adaptor block.
10
Top is ready for installation.
11
Get the Boomba Torque Arms ready.
12
During our installation we will use the set
of Boomba high strength bolts.
Bolts are not included with the mount
set. They can be purchased separately
at our web site
. www.boombaracing.com
TOOLS REQUIRED
Set of car stands
M10 socket wrench
M15 socket wrench
M18 socket wrench M21 socket wrench
Screwdriver
Pliers