Boomba Racing Fiesta ST BOV Adapter - Manual

FORD FIESTA ST
BLOW OFF VALVE ADAPTOR
1 Remove plastic vacuum hose from rubber
adaptor on the top of valve cover (leave
rubber adaptor in place). 1 When lifting the car
always use stands to
secure the car. 2 Remove the right front wheel. 3 Disconnect the blow of valve wire
harness. 4 Remove the factory blow of valve.
5 Wipe out oil residue from the bottom of
the turbo housing. 6 Boomba Blow Off Valve Adaptor ready for
installation. 7 Install the Boomba Blow Off Valve
Adaptor with provided screws. Connect
the wire harness. 8 Reinstall the right front wheel.
MATERIALS REQUIRED
None
TOOLS REQUIRED
Set of car stands
M5 long allen wrench