Bowers Group Sylvac D100S Readouts User Manual
Page 70
Advertising
4.6 ACCESSORIES
Standard measuring tip with 2 mm diameter ball (supplied with each probe)
Order No: 905.2204
Ordinary comparator tips, with standard M2.5 thread, may be attached to Sylvac probes.
Rubber boot set for P10 and P10L
Order No 901.2003
Rubber boot set for P25 (19 mm travel)
Order No 901.2004
Lever with photocable, for P, P10 and P25 probes: Order No 901.2005
For P50 probe
Order No 901.2006
Pneumatic lifting jack:
- for P10 and P25 probes, mounted on 12 mm diameter. Lifting stroke 30 mm
Order No 901.2010
- for P50 probes (dimensions in brackets). Lifting stroke 55 mm
Order No 901.2011
Input pressure is 2 to 3 bar (dry, filtered air). The jack does not affect the probe's
measuring pressure. The unit is fully sealed and requires no maintenance.
69
Advertising