Brandmotion 9002-8521 - Manual

INSTALLATION INSTRUCTIONS
8521 Instructions 7-26-13.doc Page 1 of 5
OEM Recessed Lip Camera with Harness and Auto Dimming Mirror
(Kit part number 9002-8521)
Please read thoroughly before starting installation
and check that kit contents are complete.
Items Included in the Kit Tools & Supplies Required:
Bubble bag containing:
Camera with Mount (in zip lock bag)
Camera Harness
Mirror
Mirror Harness
Chassis Harness
Zip lock bag containing:
12 Zip Ties
2 Rubber Nuts
2 Bolts
2 Sets of T-taps
Orange & White Exterior Dimming Wires
(If needed)
Zip lock bag containing:
These Instructions
Self-adhesive Template
Phillips Screwdriver
T20 Torx Driver
Center Punch
1/8” & 5/16” Drill Bits
5/8” Drill Bit or Center Hole Saw
Power Drill
Roto Tool
File
Multi-meter or computer safe test light
Wire Ties or Electrical Tape
Wire Crimper
Ground Eyelet
(Recommended)
Soldering Iron
Solder
(Recommended)
Plastic trim removal tool
Rubber Grommet or Silicone Caulk (Recommended)
Vehicle service manual (If needed)
Additional Parts That May Be Needed (see Application Guide. Parts separately):
5000-VWAB Volkswagen mirror mount adapter
5000-CAMLOCK Honda/ Subaru mirror mount adapter
Safety Precautions:
•
Work in well ventilated area that is clear of obstructions.
•
Secure vehicle with tire chucks in both front and rear of tires.
•
Turn vehicle accessories OFF and ensure ignition key is in OFF position.
•
Wear safety goggles and snug fitting clothes.
•
Use tools only for their intended purpose and which are in good repair.
•
Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions. For the latest full color
instructions, as well as an installation video, please visit www.brandmotion.com