How to set up your brinno gardenwatchcam – Brinno GWC User Manual
Page 3
1. Remove the GardenWatchCam from the
package.
2. Check to make sure that all the contents are
included.
3. Open up the GardenWatchCam by placing it
Lens side down on a flat surface, or Lens side
down in the palm of your hand, and remove
the battery door by pulling open the latch.
4. With the wheel in the middle of the camera
you can choose between one of seven time
interval settings. Simply rotate the wheel with
your finger left or right to choose the desired
setting.
1 minute
5 minutes
30 minutes
1 hour
4 hours
24 hours
Custom ( Factory setting = 5 seconds )
How to set up your Brinno GardenWatchCam
** To modify the 7th custom setting, insert the CD included with your GardenWatchCam
into your computer, and follow the instructions.
The custom setting can range anywhere from 5 seconds to 11 hours and 59 minutes and 59 seconds.
The factory default custom setting is set to 5 seconds.
(The specific steps to install the software onto your computer as well as your USB
Flash Drive are listed below on page 8-11).
1
2
3
4
5
6
7
Wheel position
The Custom Time Interval setting options are as follows:
Time interval between pictures
Macro Image
Standard Image
Power Button
Lens
Battery Cover
Mounting
Hole
USB
Flash Drive
AA Battery
AA Battery
AA Battery
AA Battery
Wheel
‧
02
03
‧