Mportant, Nformation – brite-View plugCAM BVC-500C User Manual User Manual
Page 4
1
1.
I
MPORTANT
I
NFORMATION
1.1 Important Safety Notes
The plugCAM is intended for connection to the AC power line. For installation instructions, refer to
the Installation section. The following precautions should be taken when using this product.
z
Please read all instructions before installing and operating this product.
z
Please keep all instructions for later reference.
z
Please follow all warnings and instructions marked on the product.
z
For safety reason, when device is being powered on, this product should NOT be
installed in any electric socket which makes the surface with venting holes on the
product to face downward (facing the floor).
z
Unplug the Powerline device from the wall outlet before cleaning. Use a dry cloth for
cleaning. DO NOT use liquid cleaners or aerosol cleaners.
z
DO NOT operate this product near water.
z
This product should never be placed near or over a radiator, or heat register.
z
This product relies on the building’s electrical installation for short-circuit (over current)
protection.
z
DO NOT allow anything to rest on the product interconnect plug. DO NOT locates this product
where people may walk on the cords.
z
Because this product sends data over the power line, it is recommended that you plug directly
into a power outlet. Do not plug the device into a UPS or power strip with surge protection. The
product has its own power filter for protection against surges.
z
Only a qualified technician should service this product. Opening or removing covers may result
in exposure to dangerous voltage points or other risks.
z
Unplug the product from the wall outlet and refer the product to qualified service personnel for
the following conditions:
¾
When the interconnect cords are damaged or frayed.
¾
If liquid has been spilled into the product.
¾
If the product has been exposed to rain or water.
¾
If the product does not operate normally when the operating instructions are followed.
¾
If the product exhibits a distinct change in performance.