brite-View LinkE Mini BV-5100 User Manual - Manual (Page 7)

7
2.2.1 Button/LED Descriptions
Button/LED Description
ON: Power on and ready.
Blinking:
1. Slow blinking (2.0sec ON / 3.0 sec OFF): Sleep mode.
2. Fast blinking (0.5 sec ON / 0.5 sec OFF): PLC group pairing.
OFF: Power off.
ON: Ethernet connection detected.
Blinking: Network traffic in transaction.
OFF: No Ethernet connection detected.
ON: PLC connection detected.
Blinking:
1. Fast :
100Mbps > Powerline data rate > 60Mbps.
2. Normal :
60Mbps > Powerline data rate > 10Mbps.
3. Slow :
10Mbps > Powerline data rate.
OFF: No PLC connection detected.
(Too far for communication or not paired with other devices).
GROUP
Button
Press 10 seconds:
Randomly generate a new network group name.
Press 2 to 3 seconds:
Start paring with the other PLC device. Paring procedure keeps for 2
minutes or ends automatically when they are paired. It can be stopped
manually by pressing the button for 2 to 3 seconds again.
RESET Button
Press 1 to 2 seconds: Reset to default group name HomePlugAV.
Press the button while the device is powered. (not in standby mode)