brite-View LinkE Air BVH-5101C User Manual - Manual (Page 23)

23
5.4.2 Advanced (Advance Wireless Settings)
Advanced Wireless
Item Description
BG Protection Mode
You can select the other options including On and Off. The B/G
protection technology is CTS-To-Self. It will try to reserve the
throughput for 11g clients from 11b clients connecting to the device as
AP mode.
Beacon Interval
Beacons are the packets sending by Access point to synchronize the
wireless network. The beacon interval is the time interval between
beacons sending by this unit in AP or AP+WDS mode. The default and
recommended beacon interval is 100 milliseconds.
Data Beacon Rate
(DTIM)
This is the Delivery Traffic Indication Map. It is used to alert the clients
that multicast and broadcast packets buffered at the AP will be
transmitted immediately after the transmission of this beacon frame.
You can change the value from 1 to 255. The AP will check the
buffered data according to this value. For example, selecting “1”
means to check the buffered data at every beacon.
Short Preamble
Default: Disable. It is a performance parameter for 802.11 b/g mode
and not supported by some of very early stage of 802.11b station
cards. If there is no such kind of stations associated to this AP, you
can enable this function.
Tx Burst
The device will try to send a serial of packages with single ACK reply
from the clients. Enable this function to apply it.
Wi-Fi Multimedia