Force v, Faq - troubleshooting, User manual – Brother, Brother & Sons Force V Ver. 2.0.05 User Manual
Page 13
Advertising
USER MANUAL
12
FORCE V
WWW.BROTHERS-SONS.DK
FAQ - TROUBLESHOOTING
Brother, Brother & Sons ApS - The information in this manual is subject to change without notice.
Go to www.brothers-sons.dk for the latest version.
At upstart the display keeps
1. Software upload has been interrupted.
changing between bl_x_xx and 4551
Upload new software.
The luminaire does not respond to DMX 1. Check - that the cable is properly connected to DMX IN
2. Check - that the DMX present indicator is on.
3. Check - “DMX IN” in the menu to see if the luminaire receives
any DMX data.
The luminaire is flashing
1. Check your strobe settings vs. your patch
software v: 2_0_05
Advertising